350W UltraSlim NXT Gen Infrared Heating Panel - Electric Panel Heater
350W UltraSlim NXT Gen Infrared Heating Panel - Electric Panel Heater
Manufacturer: | Mirrorstone |
Wattage: | 0.35kW (350W) |
Cost of Electricity (pence per 1000W): | 7.83 |
Dimensions (mm): | 295mm x 1195mm x 22mm |
Panel Weight: | 3.2kg |
Surface Material: | Premium FIR Coating |
Panel Brightness: | Bright |
Surface Temperature : | 85ºC - 95ºC |
Wi-Fi: | No |
IP Rating: | IP54 - Protected against splashes of water |
Voltage: | 230V |
Flex Cable Length: | 1.5m |
Product Features: | Built in Thermostat with Remote Control |
Warranty: | 2 Years Upgradable to 5 Years |
Requirements: | Eco Design Requirements for Electric Local Space Heaters |
Remote Included: | Yes |
Frame Option: | Standard Frame |
If you wish to make the change to clean, efficient heat that looks great, then infrared heating is definitely the best way to do it. This aesthetically pleasing panel measures 295mm by 1195mm, but can heat your room very well. It has a power output of 350W, meaning it can heat an area of roughly 5-6m2.
The panel has a premium FIR Coating surface, so it looks great and is sturdy, too. It can reach temperatures of approximately 75-95˚C, which is roughly the same as a conventional radiator. However, this could be mounted on the wall or ceiling, well out of reach of any accidental touches. It has an IP54 rating, which means it can handle splashes of water with no effort at all.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
By choosing the ceiling mount option when purchasing your panel, a Suspension Kit will also be dispatched with your order. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Advantages of Infrared Heating
One of the best things about infrared heating is how eco-friendly it is, and how it saves you plenty of money on your heating bills. It’s super-efficient, and can save you around 60% on your heating bills! The way it does this is by heating the objects in the room, rather than just the empty spaces in front of it. Infrared waves are beamed around the room, where they bounce off of the objects, leaving them warmed. These infrared waves are the same as those used by TV remote controls, so you know they’re completely safe.
Traditional heating methods just warm the air around them, which cause warm air currents. These force the heaters to work harder, as the warm air rises, cools, and falls again, requiring more heat. These convectional currents also cause dust circulation, mould growth, and cold spots, which is why infrared heating is better for your health.
FIR Coating For Maximum Efficiency & Safety
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
The NXTGEN
Our NXTGEN heaters have been specially designed to be compliant with Lot20, so they’re smart and efficient. They have a 39% out of a maximum 40% rating! They have automated temperature control, so they’ll regulate the temperature of the room to one you choose. They also come with a 7-day timer, so you can set different four on/off times in 5+2 mode, or two different timers in 1-7 mode for the week.
With open window detection, it’ll know if the temperature has dropped 1.5˚C in three minutes, and will switch off. For more information on these NXTGEN heaters, see our NXT Gen IR Panel manual, and see how superb they are.
Remote Control
Every NXTGEN infrared panel is supplied with a remote control, which allows you to control different features of the panel. It’s easy to use, and has a few different features.
The electronic thermostat is much more precise than a mechanical one, so you can always be assured your room is at the right temperature. It’s so simple to change the temperature of the heater, and to set your weekly timers.
Plus, the ability to change your room’s temperature without leaving your seat to change the boiler or thermostat is massively underrated.
You can pair your remote with multiple heaters, too, so you can control entire zones of the house with one button.
Sleek Look
With such a slimline profile, you don’t need to worry about it taking up too much room.
These heaters are nothing like clunky radiators or inefficient portable heaters, because they are super-discrete.
They take up much less space than traditional heaters, and can either be installed high up on the wall, or on the ceiling. This is because they heat objects, and so don’t rely on their warmth rising into the room.
With this UltraSlim heater, it’s perfect for smaller gaps on the wall that a normal heater has absolutely no chance of being able to fit into. The clean white finish looks super minimal in both lightly and darkly decorated rooms.
Installation Information
These panels are extremely easy to install, with no professional help necessary at all. That’s right – no electricians or plumbers are needed, because it’s a complete and utter one-person job.
It’s as simple as drilling a couple of holes into the wall, because there’s a stencil included with every panel that means there’s no measuring or struggling to find where the holes go.
Just drill through the holes on the stencil, and slip the screws into the holes. Using the two rear-mounted brackets, rest it onto the screws. They’re plug-and-play compatible, so all you have to do is plug it into the mains. It takes just minutes to do the whole process!
Warranty & Returns
Every one of our white infrared heating panels come with a superb 14-day home trial period, so if you change your mind, you can either return or exchange it, with questions asked.
Mirrorstone also provide you with an incredible 2-year warranty, so you don’t have to worry about purchase protection at all. This is extendable to 5 years at no extra cost.
Contact Information
If you have any queries about this IR heater, or infrared heating in general, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at sales@suryaheating.co.uk, or check out our Facebook , Instagram and Twitter pages.
Thinking Of Choosing Klarna
To make paying for your heaters easy, we've partnered with Klarna whose smart technology lets you apply for and then complete your payment application quickly and entirely online.
Once you’re happy with the items in your basket and you reach the checkout page, you have two options:
- Buy Now Pay Later in 30 Days
- Pay in 3 Instalments
Pay in 30 Days
For any orders up to £800, you can opt for our Buy Now Pay Later option. This simply defers your payment for up to 30 days from the date of dispatch, with no APRs or late fees.
Pay in 3 Instalments
For any orders between £35 and £1000, your second option is to pay in 3 equal instalments. This splits your payment into 3 simple steps, with the first payment on day 1 when you place your order, the second payment on day 30, and the final payment on day 60.
This also comes without any underlying credit agreements or APRs.
To be eligible for Klarna payments, you must be a UK resident, aged 18 or over. Klarna may perform a soft check which will not affect your credit score.