Controlling your Zenos Infrared Bar Heaters is easy with its included remote control! Here’s our quick step-by-step guide.
Before You Start
Make sure your Zenos heater is remote controllable. If it has a red LED indicator, then it’s not. But if it has a LED screen, you’re good to go.
Switching Your Heater On
Use the On/off button to switch your heater on. The LED screen will light up straight away. To turn your heater off again, just tap the same button.
Adjusting Your Target Temperature
Press the Temperature button on your remote, then the up or down arrows to adjust your target temperature. You can adjust the target temperature in one degree increments.
Adjusting Your Timer
Press the Timer button on your remote. You’ll see a flashing 00 sign on your heater’s screen. From there used the up or down buttons on your remote to adjust the length of time your heater will be on in hourly increments, to a maximum of 24 hours.
To save your settings, simply leave the heater alone for a few seconds. The timer will appear to let you know it’s all set up.
Switching Between High & Low Power
Press the High/Low button on your remote to switch between full power and half power mode. You’ll see a full sun icon when your heater is using 100% of its power, and a half sun when it’s using 50%.
Toggling The Display
Press the Set button twice on your remote twice to turn off the display. This will make it look more discrete and save you a bit of power. To turn the display back on, just tap the set button again.
Locking & Unlocking Your Bar Heater
Press Set and then Child Lock to lock your bar heater. A lock symbol will appear on the display. Repeat the process to unlock your heater.
For more information, please feel free to give us a ring on 0116 321 4124, or send us an email to cs@suryaheating.co.uk. Don't forget you can also get social with us too by following us on Facebook, Twitter and Instagram.